Technomark Multi4 V3 User Manual Download Page 50

Page: 50 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com



Date

: The three fields,

day

month

and

year

are modified by scrolling the values with the

right and left

position arrows



Hour: Hour and Minute

fields are modified by scrolling the values with the right and left

position arrows.



Time Zone:

To change time zone, use the right position arrow and select the time zone

corresponding to your geographical zone in the proposed list. Configuring your time zone
allows automatic changes between summer and winter time.



Teams

: You can configure up to 5 shift team on you marking machine. You must define for

each team the starting time (format HH:MM) and the name (up to 10 characters). Teams are
used in the Timestamp part. Use the up and down position arrows to go from one field to the
next.



Custom

: You can define a customised timestamp format for Hour, Day, Month, and Year. Use

the right positioning arrow to open the corresponding editing windows:

Summary of Contents for Multi4 V3






















































































Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands

Technomark Multi4 V3, User Manual

Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands