TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement
34
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
V : SJ
Le : 20/06/17 R : DD
www.technomark-marking.com
C.
Position Mode - Force
Position mode allows configuring your marking line. You may as well change the following
characteristics by pressing one of the buttons:
Combined use of those keys with the
shift
key allows applying those modifications to
all the
marking lines.
This tool bar is only available in
Supervisor
Mode
a)
Set position
–
Easy shift
Pressing
Set Position
key allows using the
position arrows
to position the current line with steps from
0.2 to 1.6mm.
The key stays in the press state during modifications:
The position is visualised on the
grid
and the position (origin point at bottom left of the line outline)
and the z axis position is shown in a window at the top left of the screen.
Positioning actions are simultaneously commending
marking head position
if the
easy shift
function
is activated.
Easy shift
function allows precise positioning at the part to be marked level. To activate or deactivate
this function, see
advanced parameters
.
Set
position
Set
Force
Set height
and width
Set angle and
circular marking
Centre
