Technomark Multi4 V3 User Manual Download Page 56

Page: 56 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

Navigation inside the window is done with the up and down position arrows. The right and left
position arrow allows modifying values.



Optimised speed

: allows selecting the speed at which the machine will go to the first marking

point. It can be set to OFF, standard or high. If the value is OFF, The machine will go to the
first marking point at the file programmed speed.



Bidirectional

: The bidirectional mode allows shortening marking times using the possibility of

the machine to mark in one way or the other one.

Off : The machine marks each line from beginning to end of each line

On: The machine optimises the course and can be conducted to inverse the marking
direction.



Easy shift

: Allows activating or deactivating of the easy-shift function. Easy-shift moves the

marking head when you are

positioning the marking line



Parking

: You can define a parking point for your marking head. If this option is “ON” the

marking head will move to the X, Y position that you have defined at each end of marking
using marking speed, instead of coming back to origin. The

return

parameter is specifying the

number of marking after which the marking head will come back to origin, to avoid shifts in
position (maximum 500). This option allows reducing cycle time, and/or clear up the zone
under the machine.

Use

to confirm your modifications or use

to cancel your modifications.

Maintenance

This icon appears on status bar when maintenance is needed

Maintenance

allows the user to visualise several marking machine maintenance information

Summary of Contents for Multi4 V3






















































































Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands

Technomark Multi4 V3, User Manual

Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands