Technomark Multi4 V3 User Manual Download Page 14

Page: 14 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

Main screen and general operation

Once the machine is started, the screen (if no error has been detected at the power up) looks this
way:

The

file name

shown is the one of the

current file.

If a file is in a sub folder, his name is on the left of the file name (see

Folder

If the file has been modified but not saved a small star* is added at the end of the name, to warn the
user. Once the modifications have been saved (see

save

automatic save

), the star disappears.

The marks counter is incrementing at the end of each mark realised. It can be re-initialized (see

interface parameters

)

File name

Marking

counter

Two lines Info

Graphical view

Tool bar

IDI

Mode

Summary of Contents for Multi4 V3






















































































Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands

Technomark Multi4 V3, User Manual

Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands