Technomark Multi4 V3 User Manual Download Page 42

Page: 42 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

A standard text has a spacing value of 4. This value can vary from 0 to 9; bellow 4 the text is
narrowed, and above 4 it is widened.

Spacing : 0

Spacing : 9

Use

or press again the key to confirm your modifications.

Use

to cancel your modifications.

Back to default values.

Pressing

back to default values

allows restoring the default text parameters for the current line.

These parameters values are:



Matrix : 5x7



Font : OCR



Italic value : 5



Spacing value : 4

File Mode

File Mode

allows configuring the marking files.

The different functions proposed in

supervisor mode

are the following:

Production

Mode,

New

and

File

are not available.

Save

Open

New

USB

File

Summary of Contents for Multi4 V3






















































































Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands

Technomark Multi4 V3, User Manual

Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands