Technomark Multi4 V3 User Manual Download Page 52

Page: 52 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

If the entered licence number is valid, the field will change colour from red to green. The number in
the title of the window is your machine serial number which will be asked for if you wish to obtain a
licence number.

Interface Parameters

–

Language

–

Autosave

–

Standby

The Parameter Interface allows configuring several parameters with the following window:

Navigation in the window is done with up and down

position arrows



Language

: Language of your machine can be modified using the right and left position

arrows.



Units

: Units of your machine can be modified using the right and left position arrows.



Auto-Save

: Automatic save of the current file (on power fail) can be activated/deactivated

using the right and left position arrows.

In Operator

mode, marking files are automatically saved when loading a new file.



Brightness

: Brightness of your machine can be adjusted using the right and left position

arrows.



Sleep mode

: Sleep mode (energy save) of your machine can be modified using the right and

left position arrows. The machine will be wake up by any external event (keyboard, USB

Summary of Contents for Multi4 V3






















































































Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands

Technomark Multi4 V3, User Manual

Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands