TECHNOLOG Cello 4S, Product Manual, Page: 18 / 43

C
Copyright Technolog Ltd. 2017. All rights reserved.
Information contained in this document subject to
change without prior notice.
Sheet 18 of 43
Technolog Limited,
Ravenstor Road,
Wirksworth,
DE4 4FY,
United Kingdom T: +44 (0) 1629 823611
E: techsupport@technolog.com
www.technolog.com
DMR No.: 7504
2099PM9000 Rev. B
Standard connections - Port 3:
Two signal input (analogue and / or digital) connection
(continued)
ABB 'Aquamag' (single channel) connection:
ABB 'Aquamag' (dual channel) connection:
Aquamag
(Note where supplied terminated
with a 12-way 'Mil. Spec.'
connector, Technolog interface
cable CBL220 is available for
direct connection to Cello 4S)
Aquamag
(Note where supplied terminated with
a 12-way 'Mil. Spec.' connector,
Technolog interface cable CBL225 is
available for direct connection to
Cello 4S)
+V
GPi2 & / or GPi3
GND (0V)
'FWD'
flow
'DRAIN' /
'GND'
Orange
Screen
+V
GPi2
GND (0V)
Orange
Screen
+V
GPi3
GND (0V)
Blue
'DRAIN' /
'GND'
'FWD'
flow
'REV'
flow
Internal pull-up
resistor enabled
in configuration file
Internal debounce
capacitor disabled
in configuration file
Internal pull-down
resistor enabled
in configuration file
330k Ω
Internal pull-up
resistor enabled
in configuration file
Internal debounce
capacitor disabled
in configuration file
Internal pull-down
resistor disabled
in configuration file
330k Ω
Internal pull-up
resistor enabled
in configuration file
Internal debounce
capacitor disabled
in configuration file
Internal pull-down
resistor disabled
in configuration file