Technogym Synchro Excite 500, Service Maintenance Manual

Page: 88 / 202

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Pagina 6.34
(1)
Place the tester probes across pins
1
and
8
of connector
CN1
of the TGS reader. The
measured value should be +12 Vdc.
(2)
As for step (1) but across pins
1
and
9
of connector
CN8
on the display board.
(3)
Use the serial communications test described at paragraph 6.2.1.3 “Serial Ports Test”.
If you replace Display board/Brake board, check that its SW version is updated, otherwise
install the last version.