Technogym Synchro Excite 500, Service Maintenance Manual

Page: 57 / 202

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Page 6.3
Here below have been detailed all the parameters of the menu.
6.1.1. I2C D
EVICE
T
EST
The I2C Device test checks the communication following the 32K and 256K memories. The test
can have two outcomes:
•
“Test Successful”: Signifies that data packets were successfully transmitted and received
toward the display board.
•
“EEPROM Error”: Signifies that the display board has communication problems with the memories.
6.1.2. CS
AFE
COM
TEST
The test checks the communication on CSafe ports. The test can have two outcomes:
•
“Test Successful”: This means that the test was completed successfully, i.e. that serial
communications on the selected port are correct.
•
“Error COM1”: This means that the outcome of the test was negative.
The “CSafe COM test” done on a machine which CSafe port is not plugged with the monitor
plug described at chapter 4 of the Service & Maintenance manual.
6.1.3. L
OW
K
IT
COM T
EST
The test checks the communication with the Low kit. The test can have two outcomes:
•
“Test Successful”: This means that the test was completed successfully, i.e. that serial
communications on the selected port are correct.
•
“Error COM2”: This means that the outcome of the test was negative.