Technogym JOG EXCITE, Service Maintenance Manual, Page: 76 / 126

JOG EXCITE: Service & Maintenance Manual - rev. 1.1
Page 7.8
7.7. DISASSEMBLING THE READY TO RUN BOARD
Figure 7.7-1
1. Turn off the machine and unplug the mains
lead from the wall outlet.
2.
Back off the screw
a
using a small Phillips
screwdriver.
3. Remove the plastic cover
b
from the
handlebar.
Figure 7.7-2
4. Disconnect the connector
c
from the board.
5. Remove the board from the plastic cover.
To reassemble the board, carry out the above
steps in reverse order.
During the reassembling procedure do
not forget to place again the light
conveyor “d” between the board and the
cover.