Technogym JOG EXCITE, Service Maintenance Manual

Page: 100 / 126

JOG EXCITE: Service & Maintenance Manual - rev. 1.1
Page 9.6
9.1.14. E
NABLE UP
/
DOWN MOTOR
This parameter enables or disables use of the machine incline. To change the selection, when the
LED matrix shows the current setting:
UP-DOWN: xxx
Press the
+/- GOAL
keys to select the desired option out of those listed in the table below:
U
P
-D
OWN
ENABLED <default>
DISABLED
Press
ENTER
to confirm the selection, use the
+
or
–
speed keys to move to the next or previous
parameter.
9.1.15. R
ESETTING PARAMETERS TO DEFAULT VALUES
It is possible to reset the user menu parameters to their default values. To select the function, when
the LED matrix shows:
DEFAULT CONFIG.
Press
ENTER
to confirm the operation, use the
+
or
–
speed keys to move to the next or preceding
parameter. If the
ENTER
key is pressed the LED matrix will show:
CONFIRM ?
press
ENTER
to confirm, or cancel by pressing the
CLEAR
key for a few seconds.
9.1.16. F
ORMAT
P&P
This function formats a TGS key for Plug&Play mode operation. To select the function, when the
LED matrix shows:
FORMAT P&P
Press
ENTER
to confirm the operation, use the
+
or
–
speed keys to move to the next or preceding
parameter.
At the end of the format procedure, hold down the
CLEAR
key for a few seconds to exit. The
CLEAR
key can be pressed at any time to interrupt the procedure and revert to standby mode.
9.1.17. U
SER
D
ETECT
This function is able to detect the presence of a user running on the tread belt during an exercise
session. It is possible to configure a minimum speed at which the machine will determine that the
user has stopped running on the treadmill, and interrupt the exercise session if the condition persists
for one minute. To change the setting, when the LED matrix shows the current duration:
USER DETECT: xxx