Technogel FILLERDESK 3, Instructions For Installation, Use And Maintenance Manual

Page: 29 / 52

FILLERDESK
29
Premendo il comando “freccia su”, si va ad estrarre una
ricetta dal PLC.
ATTENZIONE
Se state lavorando con una ricetta già impostata non
premete mai in nessun caso il tasto “freccia
su”,cambiereste tutti i parametri predefiniti della vostra
ricetta.
Per ritornare alla pag. iniziale premere un tasto qualsiasi
(F1-F2-F3 F4).
By pushing the envelope button you can create a new
recipe and then save it.
By pushing on the name bar an alpha-numeric keyboard
will appear in order to name your recipes.
To see all the recipes saved press the indicated button.
It’s possible remove the recipe thanks to the waste
command.
It’s possible have a description of the present functions
thanks to the “question mark”.
Set the desired values by pressing on the column ice-
cream’s value, capacity, viscosity etc.,. (a numeric
keyboard will appear)
At the end of your recipe save it by pushing the save
button.
We advise you to save the recipes on your computer or
USB key, for information contact TECH. OFFICE
TECHNOGEL.
After having finished the recipe, to set it, press the “arrow
down” button, this will permit the down-load of the
parameters relative to the recipe chosen in this way the
freezer is ready to work with your recipe.
To save the recipe with a name, press on this command.