Important operating instructions
Please read this first
>
Before you begin operating your receiver, please first check whether the
package contains all the components that should be included.
The following are supplied:
1 digital receiver, 1 mains power cable,
1 remote control, 1 operating manual,
1 guarantee card, 2 batteries (1,5V micro-cell)
1 SCART cable.
>
Insert the batteries provided in the battery compartment of the remote
control, observing the polarity indicated.
>
Before connecting your digital receiver, please first read the safety notes in
Chapter 3.
> Chapters 4, 5 and 6 describe how to connect the digital receiver to
the external unit (dish, LNB, ...), to the television set, VCR, etc., and how
to make the appropriate settings. These settings need be made only once,
and will only need to be adapted if your external unit changes, or if
additional appliances are connected.
> Chapter 7 describes all the functions necessary for daily operation of
the receiver, e.g. programme selection.
>
In Chapter 8 you will find information on how to set new programmes, or
how to change the order of programmes.
>
Chapter 9 describes the settings required if you are operating a motorised
rotating antenna.
> Technical terms used in the operating manual are explained in Chapter 10.
> Technical data and specifications can be found in Chapter 11.
> A trouble-shooting guide to help you overcome problems can be found
in Chapter 12.
Operation of the digital receiver is simplified by the use of so- called "On Screen
Displays"; this also serves to reduce the number of keys required on the remote
control unit. All functions are displayed on the screen, and can be operated with a
few keys.
Related functions are combined in a "MENU". The function selected is highlighted in
colour. The “function keys” red, yellow, green and blue are displayed along the
bottom of the screen in the shape of coloured bars. These coloured bars represent
different functions in the individual menues, which can be implemented by pressing
the appropriate coloured key (“multi-function key”) on the remote control. The
“function keys” are only active when a brief description is displayed in the
appropriate field. Key descriptions and terms that appear on the OSD menu are
printed bold in this operating manual.
Help:
Where available in the menues, pressing the blue function key will
cause a help text to be displayed, pressing again will remove the
text from the screen.
7
Summary of Contents for DIGIT MF4-S
Page 52: ...Notes 52...
