8.4.1 Automatic search
1. Automatic search
Select this type of scan in order to search all satellites set in the menu LNB Settings (Point 6.4
and 8.4) for programmes.
2. Satellite search
Select this type of scan if you want to search for programmes only on one specific satellite.
3. Transponder search
Select this type of scan to search on only one specific transponder of a satellite.
4. Manual search
Use this type of scan to search specifically for a particular programme, using programme-
specific PID numbers.
When the scan has been completed, a message will be displayed on your TV screen,
indicating the number of programmes your digital receiver has found, how many of these are
ne, and how many of them are encrypted programmes. New programmes are stored in the
Total list, and can then be included in the Favorites list in accordance with
Point 8.1
.
> In order to scan for programmes, first call up the
Main Menu
.
> Use the
arrow keys up/down
to mark the line Scan
.
> Confirm by pressing
OK
.
The sub-menu
Scan
will be displayed.
> Now use the
arrow keys up/down
to select the type of scan you would like to perform,
and confirm by pressing
OK
.
When using this option, all the satellites set in the menu LNB Settings (Point 6.4 and 9.4) will
be scanned for programmes. You can also decide whether you wish to scan for all
programmes (free- to-air and encrypted) or only for free-to-air programmes.
> Press the
OK
, key to decide whether you wish to scan only for free-to-air programmes
(
Free channels
) or whether you wish to include encrypted programmes (
All
chanels
).
> To confirm, press the
green
function key
Start search
.
This scanning procedure may take more than 15 minutes. Please also note any
messages displayed on screen.
8.4.2 Satellite search
To search a single satellite for programmes, select the option
Satellite
.
You may decide to scan for all programmes (free-to-air and encrypted) or only for free-to-air
programmes.
> Press the
OK
key again to display the selection table showing all the active satellites.
> Use the
arrow keys up/down
to mark the line
All Satellites
, to scan all active
satellites for programmes, or mark the desired satellite, to scan only this for
programmes.
> Confirm by pressing
OK
.
>
Use the
arrow keys up/down
to mark the field
Scan mode
.
37
Summary of Contents for DIGIT MF4-S
Page 52: ...Notes 52...
