7.3.1.2 Select starting time/picture
7.4 Volume control
Some channels provide the option of selecting specific movies to be shown at varying starting
times. These movies are available around the clock, and at various selectable starting times.
Where a channel provides a selection of starting time/picture, this will be indicated on screen by
a message.
> To select one of the starting times available, press the
Option
key. A selection window will
open, displaying the available starting times.
> Use the
arrow keys up/down
to select the desired starting time, and confirm by colored
botton. Provided the programme has been validated for the starting time selected, you can
view it at the desired time.
7.3.2 CONAX PIN Code
Your digital receiver is equipped with a parental control feature, which blocks access to specific
selected programmes (see Point 8.3). In addition, in the case of CONAX-encrypted broadcasts,
individual programmes not suitable for viewing by children can be given a prior block by means
of a parental control code. In order to decode the specific programme for viewing, the
CONAX
PIN code
must
be entered. This PIN code is stored on the Smartcard. You will be advised of the code when
you receive the card. The
CONAX PIN code
must therefore
not
be confused with the
Unit
PIN code
of the digital receiver (Point 8.3).
If you switch on a channel that is currently broadcasting a pre-blocked programme, a message
will be displayed.
> To view the programme, use the
numeric keys
to enter the 4-digit
CONAX PIN code
.
> As soon as the code has been correctly entered, the programme can be viewed normally.
If the code has been entered incorrectly, you can enter the PIN code again, or press B
ack
to
exit from the menu.
Your digital receiver is equipped for volume control. This makes operation of the receiver more
convenient, as you thus have all important functions combined on the remote control of the
receiver, and will only rarely have to use the remote control of your television set. When the
digital receiver is switched on, sound volume will be set at the level last used.
> Adjust the volume of your digital receiver using the
Volume ^
key to increase the volume,
and Volume
v
to decrease the volume.
> Press the
Sound on/off key
to mute the sound, press the key again to switch sound
back on again.
21
Summary of Contents for DIGIT MF4-S
Page 52: ...Notes 52...
