TechniSat DIGIT MF4-S, Operating Instructions Manual

Page: 41 / 53

8.5.3.1 Adapting programmes
> Use the arrow keys up/down to select the line Update channel list
.
> Press the OK key to go to the sub-menu Update channel list .
> To ensure that your receiver will check automatically to see whether a new channel list
is available, mark the line
Update
.
> Switch the automatic channel list updating function On by pressing
OK .
To start the updating of the programme list manually, press the
red
function key
Test
and confirm the message displayed by pressing Yes.
Your receiver will restart itself, and will indicate the presence of a new programme list
by means of a message on screen.
> If you do not wish to download the new programme list immediately, but rather at a
later time, mark the field Later and confirm by pressing OK . The prompt will appear
again the next time you switch on the receiver.
> If you do not wish to download the new programme list at all, mark the field Reject
and confirm by pressing OK . The message will only be displayed again the next time
an even more recent programme list is transmitted.
> To download the new programme list immediately, confirm by pressing OK . The
download of the programme list will be started, and the progress can be followed on
screen.
When the download of the programme list has been completed, your programme list will be
updated. In this procedure, the Favourites list stored in your receiver will be compared to the
new programme list. If this comparison shows you have not yet made any changes in your
receiver with reference to the factory-programmed default programme list, then the new
programme list will be exchanged completely for the old one. If, however, you have made
changes to the programme list, the update of your Favourites list will proceed in several steps.
The differences between your Favourites list and the new programme list will be displayed on
screen. You can then decide for yourself, which changes you wish to make, and which not. The
number of steps to go through depends in each case on the number of changes in the new list,
and can therefore differ from one download to the next.
In this step, the programmes in your favourites list are shown where their reception data has
changed, or where they are no longer up to date. These programmes can possibly no longer
be received correctly. To ensure that you have continued problem-free reception, we
recommend you make the suggested changes.
> Press the OK key to update the reception data of the marked programmes.
41