7.15.7 SFI functions
7.15.7.2 SFI timer programming
> Hold down the
yellow
function key to page forward continuously. A clock is
displayed to give you a better overview. Press the
green
function key in the
same way to page backward through the tables.
The individual days of the week are displayed along the bottom of the screen.
If information relating to the following days is available, the appropriate fields
will be marked.
> To obtain a preview for a specific day, either press the
numeric key
corresponding to the day of the week.
or
Press the
Back
key to return to the table “
Next”
.
To execute the following
SFI
functions, call up the SFI as described in Point 7.15.3.
7.15.7.1 SFI Information
Use the
SFI Info
to obtain brief information on the marked channel
or programme. If SFI information is available, this is indicated by a
next to the appropriate
programme.
> Use either the
arrow keys
or the
function keys
to mark the desired
programme.
> Press the
SFI
key to display the information.
You can scroll or page through lengthy information text using the
arrow keys
.
> Press the
Back
key to return to the previous table.
On by means of the video recorder timer, this will be indicated by the message “rEc” shown in
the display.
Most of the functions of the remote control are disabled at this stage, to avoid
accidental interruption of the recording.
In stand-by mode, an active timer is indicated by the colon in the time display blinking, or by
the LED.
Deleting a SFI timer event
> If you would like to cancel a timer event programmed via the SFI, proceed as described
above, to mark the appropriate programme.
> Press the
red
function key
Timer
to open a selection window.
> Use the
arrow keys up/down
to mark the line Delete
Timer
.
> Confirm by pressing
OK
.
> To abort an active timer, switch of the digital receiver using the
On/Standby
key.
> Press the same key again to switch the receiver on again,
and full functionality will be restored.
27
Summary of Contents for DIGIT MF4-S
Page 52: ...Notes 52...
