7.5 Selecting a different language
If a programme is being broadcast in several languages, or
with several audio channels, this will be indicated by a mes-
sage displayed on screen
(Fig. 7-10)
. You can then proceed
to set a different language or another audio channel as fol-
lows:
>
Press the key
Language selection
.
A list indicating the languages currently being broad-
cast will appear on the screen
(Fig. 7-11)
.
>
Use the
arrow keys up/down
to mark the desired
language, and confirm by pressing
OK
.
You can now proceed to listen to the programme in the
language selected. Your digital receiver is also capable
of receiving mono programmes.
>
Use the
arrow keys left/right
to select Mono
channel 1 (
), Mono channel 2 (
) or Stereo (
).
7.5.1 Dolby Digital (AC3 mode)
If a programme is being broadcast in Dolby Digital Sound,
this will be indicated wgen you switch to the programme, as
the Dolby logo will be displayed in the Infobox. Provided you
have enabled the Dolby Digital (AC3) function in accordance
with Point 6.3.6, the programme will automatically be reprodu-
ced in this sound format.
If you have not switched on the
Dolby Digital (AC3)
func-
tion, you can switch your receiver to AC3 mode manually as
follows:
>
Press the key
Language select
. If any are being
broadcast, a list of the currently broadcast languages
as well as
Dolby Digital (AC 3)
will be displayed
on screen.
>
Use the
arrow keys up/down
to mark the line
Dolby Digital
.
>
Confirm by pressing
OK
.
You can now listen to the programme in Dolby Digital sound.
If you want your receiver to reproduce programmes in Dolby
Digital sound format automatically, you should set your recei-
ver to automatic AC3 reproduction as described in Point
6.3.6.
32
(Fig. 7-11)
(Fig. 7-10)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 32
