Technicolor MediaConnect TG234 Setup And User Manual Download Page 48

Page: 48 / 54

5 Support

DMS3-CTC-25-221 v1.0

5.1 Setup troubleshooting

Your TG234 has not been found

If you cannot find your TG234 in your local network, make sure that:



The TG234 is turned on and fully initialized.



Your network devices (for example, a gateway, a set-top box,...) have a valid IP address, that is any address but 0.0.0.0,
neither 192.168.1.100 nor 192.168.1.200. For more information, consult the help of your network device.



No dedicated firewall device or router is placed between your devices and the TG234.



No personal network security software (for example firewall software) blocks your network devices.



Your network devices are correctly connected to the TG234.

Summary of Contents for MediaConnect TG234























































Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands

Technicolor MediaConnect TG234, Setup And User Manual

Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands