20
3 Configuration tools
DMS3-CTC-25-221 v1.0
3.1.1 Access the TG234 GUI
The IP address of your TG234
If your computer and the TG234 are both connected to a gateway, browse to the GUI of your gateway to check the IP
address of the TG234.
If your computer and the TG234 are connecting directly to each other and the:
In
Access Point
mode, the default IP address of the TG234 is: 192.168.1.100
In
Station
mode, the default IP address of the TG234 is: 192.168.1.200
How do I recognize my device?
If your TG234s is in:
Access Point
mode it will be listed as
TG234-AP-XXXXXX
.
Station mode
it will be listed as
TG234-STA-XXXX
.
Repeater mode
it will be listed as
TG234-REPEATER-XXXX
.
Where
XXXXXX
is the same suffix as used for the default network name (TNCAP
XXXXXX
) that is printed on the
product label.
Accessing the TG234 GUI
Proceed as follows:
1
Open your web browser.
2
Browse to the IP address of your TG234.
For more information about how to access the GUI of your gateway, and how to check the IP address of devices,
consult the documentation of your gateway.
On a Technicolor gateway, you will have to do either of the following depending on the software it is running:
Click the
Devices
card header on the home page.
Click
Devices
in the
Home/Office Network
menu.
In
Auto
mode, try both 192.168.1.100 and 192.168.1.200.
If the repeater is not directly connected to your Internet gateway (it is connected through an Ethernet switch or
another TG234), it may not appear in the list.
Do not know the IP address? See
“The IP address of your TG234” on page 20
.
