manualshive.com logo in svg

Technicolor MediaConnect TG234, Setup And User Manual

Share
Download
Technicolor MediaConnect TG234 Setup And User Manual Download Page 20

17

2 Setup

DMS3-CTC-25-221 v1.0

2

Within two minutes, press the 

WPS

 button on the TG234 access point (or TG234 repeater). Depending on your home 

setup, this will one of the following:

A MediaAccess Xtream Gateway access point

A TG234 access point mode

A TG234 repeater.

3

The 

WPS

 LED on both devices starts blinking orange and then turns solid green as soon as the connection has been 

established.

4

Wait one minute and then check the following LEDs on the TG234 station:

The 

Link Quality

 LED must be solid green or orange.

The 

Wireless 

LED must be solid green.

5

Your station is now connected to your access point (or your repeater). Your set-top box can now communicate over the 
wireless video bridge.

< 2min.

MediaAccess Xtream Gateway

WPS

TG234 

Station

WPS

< 2min.

TG234 

Station

WPS

TG234 

Access Point

WPS

< 2min.

TG234 

Repeater

WPS

TG234 

Station

WPS

Summary of Contents for MediaConnect TG234























































Reviews:

No comments

Brands by name

Popular brands

Load more brands