Technicolor MediaConnect TG234 Setup And User Manual Download Page 44

Page: 44 / 54

4 The TG234 wireless access point

DMS3-CTC-25-221 v1.0

4.2.2 WPS PIN method (PIN)

Introduction

There are two ways to configure your wireless connection using WPS PIN method:



WPS PIN

Used when you have got the PIN code that is used by other devices of your wireless connection.



WPS AP PIN

Used when you want to configure your devices with the PIN code of the TG234.

WPS PIN

To configure the TG234 with the WPS PIN code of your wireless connection, proceed as follows:

Browse to the GUI main page.

On the

Config

menu, click

Wireless

Click the

Advanced

tab.

Select

Configured

from the

WPS State

list.

Enter the PIN code of your wireless connection in the

WPS PIN

box, and then click the

WPS PIN

button.

WPS AP PIN

To configure other devices with the WPS PIN code of the TG234, proceed as follows:

Browse to the GUI main page.

On the

Config

menu, click

Wireless

Click the

Advanced

tab.

Select

Configured

from the

WPS State

list.

Use the code in the

WPS AP PIN

box to configure the wireless settings of other devices.

For more information on how to browse to the TG234 GUI, see

“3.1.1 Access the TG234 GUI” on page 20

For more information on how to browse to the TG234 GUI, see

“3.1.1 Access the TG234 GUI” on page 20

Click

Regenerate

to refresh the

WPS AP PIN

code.

Summary of Contents for MediaConnect TG234























































Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands

Technicolor MediaConnect TG234, Setup And User Manual

Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands