Technicolor MediaConnect TG234 Setup And User Manual Download Page 51

Page: 51 / 54

5 Support

DMS3-CTC-25-221 v1.0

5.4 Wireless connection troubleshooting

No wireless connectivity

Try the following:



Make sure that all your TG234 devices are set to the correct mode.



When connecting to a MediaAccess Xtream Gateway make sure that the wireless interface is enabled.



Make sure that all your TG234 devices and gateway are configured for the correct wireless settings (Network Name,
security settings).



If the signal is low or not available, try to reposition the TG234 for optimal performance.



Change the wireless channel

Poor wireless connectivity or range

If the

Link Quality

LED of the TG234 (in

Station

mode) is red, indicating that your wireless connectivity is poor, try the

following:



Reposition the TG234 for optimal performance.



Change the wireless channel



Try to use WPA2-AES as encryption.
For more information, see

“4.4 Securing your wireless connection” on page 43

Change the wireless channel

Proceed as follows:

Browse to the

Configuration tools

On the

Config

menu, click

Wireless.

The

Basic

page of wireless config appears.

In the

Channel

list, select the channel of your choice from the list.

Click

Save

Summary of Contents for MediaConnect TG234























































Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands

Technicolor MediaConnect TG234, Setup And User Manual

Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands