Technicolor MediaConnect TG234 Setup And User Manual Download Page 26

Page: 26 / 54

3 Configuration tools

DMS3-CTC-25-221 v1.0

3.1.3 Wireless settings configuration page

Introduction

The

CONFIG - WIRELESS

page, which allows you to configure the wireless settings of your TG234, consists of two

categories:



The Basic settings



The Advanced settings

Navigation

On the

Config

menu, click

Wireless

to navigate to the

CONFIG - WIRELESS

page.

Click

Basic

Advanced

on the tab to switch between categories.

The Basic settings

The

Basic

category allows you to configure some basic settings of your wireless connections:



Device Mode

The mode you set according to the user scenarios.



Repeater

Allows you to force the TG234 in repeater mode. If the

Repeater

box is:



Selected then the TG234 will be in repeater mode.

Device Mode

displays the mode in which the TG234 is currently working.

To change the device mode, use the mode switch on the back of your TG234. For more information, see

“1.2.4 Mode switch” on page 9

If your TG234 is in

Repeater

mode, this will also be displayed as

Access Point

. If you want to check if the TG234

is in repeater mode, check the Link Quality and Access Point LED on the TG234’s front panel. If they are both on,
then your TG234 is in repeater mode.

Summary of Contents for MediaConnect TG234























































Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands

Technicolor MediaConnect TG234, Setup And User Manual

Search results

Summary of Contents for MediaConnect TG234

Reviews:

Related manuals for MediaConnect TG234

Brands by name

Popular brands