101
10 INTERNET SECURITY
DMS-CTC-20120510-0000 v1.0
10.4 Wireless Time Control
Introduction
Wireless Time Control allows you to restrict wireless access to one or two sessions. This means that your wireless devices will
not be able to connect to the Internet (or your local network) outside these time frames.
Warning
Make sure that the persons that use a wireless connection are aware of these time frames. This to avoid the loss of data or
unexpected service interruption.
Requirements
Before you can start:
Your MediaAccess Gateway must be connected to the Internet.
Your MediaAccess Gateway must use a time server for its time configuration.
For more information, see
“9.4 Network Time Server” on page 88
.
Procedure
1
Browse to the Technicolor GUI.
For more information, see
“4.1 MediaAccess Gateway GUI” on page 32
2
On the
Home Network
, click
Access Control
.
3
The
Access Control
page appears. In the
Pick a task
list, click
Wireless Time Control
.
4
The
Wireless Network Time Control
page appears.
5
Select the
Enable Schedule
box.
6
Select a start time and end time for the first session.
7
Select a start time and end time for the second session.
8
Click
Apply
.
Depending on the software version used by your service provider, this feature may not yet be available on your
MediaAccess Gateway.
