Technicolor MediaAccess TG788VN, Setup And User Manual

Page: 93 / 159

93
10 INTERNET SECURITY
DMS-CTC-20120510-0000 v1.0
Option 1: content-based filter (combined with the address-based filter)
If you want to use the content-based filtering:
1 Browse to the MediaAccess Gateway GUI .
For more information, see “Accessing the MediaAccess Gateway GUI” on page 33 .
2 On the Toolbox menu, click Parental Control .
3 On the Navigation bar , click Configure .
4 Make sure that the Use Content-Based Filter check box is selected.
5 Configure the content-based filter. For more information, see “10.1.1 Configuring Content-based Filtering” on page 94 .
6 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter. For more
information, see
“10.1.2 Adding Rules for Address-Based Filtering” on page 95 .
Option 2: address-based filter only
Take this option if content filtering is not available on your MediaAccess Gateway or you don’t want to use it.
To configure address-based filtering:
1 Browse to the MediaAccess Gateway GUI .
For more information, see “Accessing the MediaAccess Gateway GUI” on page 33 .
2 On the Toolbox menu, click Parental Control .
3 On the Navigation bar , click Configure .
4 Make sure that the Use Address-Based Filter check box is selected.
5 In the Action for Unknown Sites , select:

Allow as the default rule if you want to allow access to all web sites and manually specify which web sites may not be
accessed.

Block as the default rule if you want to deny access to all web sites and manually specify a number of web sites that
may be accessed.
6 Click Apply .
7 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see “10.1.2 Adding Rules for Address-Based Filtering” on page 95 .