Technicolor MediaAccess TG788VN Setup And User Manual Download Page 29

Page: 29 / 159

3 MANUAL INSTALLATION

DMS-CTC-20120510-0000 v1.0

3.4 Configure the MediaAccess Gateway

Introduction

If your service provider did not preconfigure your MediaAccess Gateway, you may have to configure the MediaAccess
Gateway via its Graphical User Interface (GUI).

Requirements

JavaScript must be enabled on your web browser (this is the default setting). For more information, consult the help of your
web browser.

Procedure

Proceed as follows:

Open your web browser.

The MediaAccess Gateway informs you that you have not yet configured your MediaAccess Gateway.

If this window does not appear, browse to http://dsldevice.lan or to the IP address of your MediaAccess Gateway (by
default: 192.168.1.254) and click

Technicolor Gateway

on the menu on the left-hand side.

Click

Setup my Technicolor Gateway

The

Easy Setup

wizard appears. This wizard will guide you through the configuration of your MediaAccess Gateway.

Click

Next

and follow the instructions.

Summary of Contents for MediaAccess TG788VN
































































































































































Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands

Technicolor MediaAccess TG788VN, Setup And User Manual

Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands