Technicolor MediaAccess TG788VN Setup And User Manual Download

Page: 89 / 159

9 NETWORK SERVICES

DMS-CTC-20120510-0000 v1.0

9.4 Network Time Server

Introduction

Network Time Server

is a server that makes sure that the time settings of your device (your MediaAccess Gateway) are

in sync with the official time.

This time will be used for features like:



Access Control
For more information, see

“10.3 Access Control” on page 99



Wireless Time Control
For more information, see

“10.4 Wireless Time Control” on page 101



Call logs



Event logs

Requirements

Your MediaAccess Gateway must be connected to the Internet.

Specifying a time server for your MediaAccess Gateway

Proceed as follows:

Browse to the MediaAccess Gateway GUI.
For more information, see

“Accessing the MediaAccess Gateway GUI” on page 33

On the

Technicolor Gateway

menu, click

Configuration

The

System Configuration

page appears. On the

Navigation bar

, click

Configure

Under

Time Configuration

, select

Auto-configuration

and configure the following settings:

Summary of Contents for MediaAccess TG788VN
































































































































































Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands

Technicolor MediaAccess TG788VN, Setup And User Manual

Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands