Technicolor MediaAccess TG788VN Setup And User Manual Download

Page: 28 / 159

3 MANUAL INSTALLATION

DMS-CTC-20120510-0000 v1.0

3.3.2 Setting up a Wired Connection

Requirements



Both your network device (for example, a computer, a gaming console,...) and MediaAccess Gateway must have a free
Ethernet port.



Your network device must be configured to obtain an IP address automatically. This is the default setting.

Ethernet cable

In your package, you will find a cable with yellow connectors. This is the Ethernet cable.

Procedure

Proceed as follows:

Connect one end of the Ethernet cable to one of the

yellow

Ethernet ports of your MediaAccess Gateway:

Connect the other end of the Ethernet cable to your network device.

Your network device is now connected to your network. No additional configuration is needed unless specified by your
service provider.

The MediaAccess Gateway does not support Power over Ethernet (PoE). All network devices that are connected
to the MediaAccess Gateway must be powered by their own power source.

Summary of Contents for MediaAccess TG788VN
































































































































































Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands

Technicolor MediaAccess TG788VN, Setup And User Manual

Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands