Technicolor MediaAccess TG788VN Setup And User Manual Download Page 19

Page: 19 / 159

2 GUIDED INSTALLATION

DMS-CTC-20120510-0000 v1.0

2 Guided Installation

Introduction

In the guided installation, the Setup wizard on the Setup CD will assist you with the installation of your MediaAccess
Gateway.

If you do not want to use the Setup CD or if the Setup CD is not included in your package, follow the installation procedure
described in

“3 Manual Installation” on page 19

Requirements

To use the guided installation you must comply with the following requirements:



Your computer must run one of the following operating systems:



Microsoft Windows 7 and higher



Microsoft Windows 7 x64 and higher



Microsoft Windows Vista and higher



Microsoft Windows XP Service Pack 2 (SP2) and higher



Mac OS X 10.6 (Snow Leopard)



Mac OS X 10.5 (Leopard)



Mac OS X 10.4 (Tiger)



You must have administrative rights on your computer.

If you do not comply with these requirements, use the

“3 Manual Installation” on page 19

Running the Setup wizard

To start the Setup wizard:

Insert the Setup CD into your computer's CD- or DVD drive.

If your computer runs:



Microsoft Windows: The Setup CD starts automatically.
If the Setup CD does not autostart, see

“The Setup CD does not start automatically” on page 104



Mac OS X: Double-click

Menu

in the window with the content of the Setup CD.

Select the language of your choice and click

The Setup wizard will now guide you through the installation of your MediaAccess Gateway.

Summary of Contents for MediaAccess TG788VN
































































































































































Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands

Technicolor MediaAccess TG788VN, Setup And User Manual

Search results

Summary of Contents for MediaAccess TG788VN

Reviews:

Related manuals for MediaAccess TG788VN

Brands by name

Popular brands