Seite / Page 27 / 85
Electric Crimping Machine AT-300
IS412-94328 Rev. B
7.4.1
Display kalibrieren
Wenn die Symbole an einem anderen Punkt
als vorgesehen auf dem Display reagieren,
muss das Display kalibriert werden. Gehen
Sie dabei wie folgt vor:
+
Drücken Sie das Symbol
um das
Display zu kalibrieren
+
Folgen Sie den Anweisungen auf dem
Display.
7.4.2
Manuelle Motorbewegung
Um die elektrische Crimpmaschine AT-300
langsam vorwärts oder rückwärts laufen zu
lassen, gehen Sie wie folgt vor:
+
Drücken Sie das Symbol
um den
Motor
schrittweise/langsam
vorwärts
laufen zu lassen (Abb. 7.12).
+
Drücken Sie das Symbol
um den
Motor schrittweise/langsam rückwärts
laufen zu lassen (Abb. 7.12).
Beim Loslassen des Symbols bleibt die
Maschine in ihrer derzeitigen Position stehen.
7.4.3
Service Button
Der Service Button
(Abb. 7.12) ist nur für
den
Hersteller
der
elektrischen
Crimpmaschine AT-300 zugänglich und
durch einen PIN (Abb. 7.13) geschützt.
Dieses
Menü
beinhaltet
Einstellungen,
welche nur für den Einbau und Justage der
Steuerung bestimmt sind.
Service
Calibrate Touch
0
1
2
3
4
5
6
7
8
9
Enter PIN:
Motor forward
Motor backward
Service
Abb. 7.12
Abb. 7.13