Seite / Page 74 / 85
Electric Crimping Machine AT-300
IS412-94328 Rev. B
11
Problem Handling and Service Information
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the electric Crimping Machine
AT-300.
+
Before starting to handle/solve the problem, the machine has to be disconnected from
power supply by pulling out the main plug. Secure the machine to prevent unintentional
restart.
CAUTION
+
Maintenance work and problem handling may be performed only by authorized and
properly trained staff.
+
Do not operate the electric Crimping Machine AT-300 before having read and understood
all operating instructions.
+
The operating instruction must be constantly within reach of the electric Crimping Machine
AT-300. Every machine operator must have read and understood this operating instruction.
The safety instructions, warnings and precautions contained in the individual chapters must
be strictly observed by all users and operators when working on or with the electric
Crimping Machine AT-300.
+
The electric Crimping Machine AT-300 is not operable, until the problem has been solved.
+
When working with the electric Crimping Machine AT-300, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the mechanism.
+
Work with caution.
+
In cases of a malfunction of the machine or adapter incl. tool head or die sets, production
must be stopped and the malfunction must be fixed before continuing work.
+
Only one person is allowed to work on or with the machine at a time.
INFORMATION
+
In case of a blockade of the dies press the release button and disconnect the machine from
power supply.
