Seite / Page 65 / 85
Electric Crimping Machine AT-300
IS412-94328 Rev. B
7.2
Set the Lowest Ram Position
To be able to mount the adapter, the ram of the machine has to be in the lowest position.
+
Switch the machine on and turn the key
switch to key position II.
+
Pay attention to the fact that the machine
is set for the full working cycle
(Fig. 7.5).
If this is not the case, touch icon
. After
step 10 the following icon appears
. The
machine is now in the full working cycle.
+
Keep the foot pedal and simultaneously
one of the safety buttons on the right or
left side pressed until the full cycle is
finished. The ram is now in the lowest
position (Fig. 7.6).
Counter:
759.103
Lowest ram
position
Fig. 7.5
Fig. 7.6
