Seite / Page 77 / 85
Electric Crimping Machine AT-300
IS412-94328 Rev. B
Error Prompt
Explanation
Troubleshooting
048111000x15
Rotating direction of the motor is
wrong (wrong wire connection)
Send the machine back to TE
048111000x16
Short circuit on the cable of the
foot pedal
Send the machine back to TE
048111000x17
Triggered release button
Reset the release button by
turning it
048111000x18
Maximum engine torque
exceeded (crimp failed)
The crimp force required is too
high or the crimp has failed.
048111000x19
Warning! Deactivated speed
limit (Jumper on the board)
x
048111000x20
Temperature of the machine too
high
Stop working with the machine
and let it cool down.
048111000x21
Error prompt not assigned
Send the machine back to TE
048111000x22
Unknown error
Send the machine back to TE
048111000x23
Weak sensor signal (too far
away)
Send the machine back to TE
048111000x24
Sensor board is missing / does
not answer
Send the machine back to TE
048111000x25
Sensor not calibrated
Send the machine back to TE
After having remedied the error, blind out the error prompts by touching the display.
INFORMATION
+
The electric Crimping Machine AT-300 can only be operated again, after having remedied
the error.
+
If the error is not remedied, all other icons on the display are inactive (Fig. 11.2) Exception:
Error prompt 048111000x19
