1-528050-1
412-94313 Rev. A
BDA AT-65
– 01/16
Seite/Page/Página 102 / 115
ECOC: EGC0 ; LOC: AI
+
Turn off the hydraulic Crimp Machine AT-65 by operating the main switch and pull out the
power plug.
+
Remove safety guard.
+
Grease the alignment pillars of the adapter with Blaser Swiss Lube Art.-No. 00492-01 EP-
Universal Grease.
+
Mount safety guard
INFORMATION
+
To guarantee a long operation life and an optimal usage of the machine the maintenance
and lubrication intervals must be strictly observed.
10.3
Replacement of the hydraulic tubes
We recommend that the hydraulic tubes have to be replaced after a period of 5 to 6 years use.
11
Problem Handling and Service Information
11.1
Mechanical Problems and Failure
DANGER
+
Before starting maintenance, disassembly/assembly or repair work, the machine must be
disconnected from power supply. Touching live parts can cause danger of electrocution
with fatal consequences!
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the power supply.
+
Disconnect the machine from the power supply by operating the main switch and pull out
the power plug, before mounting or changing the safety guard, die adapter and die set!
CAUTION
+
The crimp machine is only allowed to be used with mounted TE approved adapter, die set
and the suitable safety guard. Pay attention to the correct assignment of adapter to safety
guard!
+
The hydraulic Crimp Machine AT-65 may only be set up and operated in perfect technical
condition, observing all the safety regulations and considering any possible dangers.
+
Assure free access to the operating elements of the machine, especially the foot switch as
well as the emergency stop and release buttons. In the case of imminent danger
immediately press the release button. The release button must be within the direct reach
of the operator. It must not be covered.
+
Before commissioning the machine, it is always important to check whether all safety
devices, especially the safety guards and die adapter, are installed and are functioning
correctly.
+
Check the release button before starting the work on the crimp machine.
+
When working with the hydraulic Crimp Machine AT-65, do not wear loose clothing, jewelry
or long, loose hair that can get caught in the hydraulic Crimp Machine
AT-65.
+
Work with caution.
+
In cases of a machine malfunction, production must be stopped and the malfunction must
be fixed before continuing work with the machine.
+
Only one person is allowed to work on or with the machine at a time.
+
Only trained personal are allowed to work on or with the machine.