1-528050-1
412-94313 Rev. A
BDA AT-65
– 01/16
Seite/Page/Página 71 / 115
ECOC: EGC0 ; LOC: AI
4.3.3
Release Button
In case of jammed jaws caused by operation
or handling errors or wrongly placed
terminals, the hydraulic Crimp Machine AT-
65 can be opened by pressing the release
button.
The machine moves to the upper end position
and the motor switches off automatically.
4.3.4
Key Switch Button
The hydraulic Crimp Machine AT-65 is delivered with 2 keys for the key switch.
For the setup of the program the key in the key switch should be in the right position:
„Program
Mode
“
.
After finishing the setup of the program the key in the key switch should be turned to the left
position:
„Production Mode“
. The tool setter should take off the key to prevent the program
from being changed by the operator during the production process.
Key switch button position left =
„Production
Mode“
,Key switch button position right =
„Program
Mode
“
Fig. 4.5
Fig. 4.6
Fig. 4.7