![background image](http://html1.mh-extra.com/html/te-connectivity/certi-crimp/certi-crimp_instruction-sheet_4102213001.webp)
Instruction Sheet
1
of 5
© 2017 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
408-35023
20 MAR 17 Rev A
Tool
Terminal
Wire
Part Number Crimping Chamber Marking Strip PN Loose Piece PN Range, mm² Insulation Diameter Range, mm
675930-1
0.5-1.5
160430
160490
0.5-1.5
2.3-3.3
160433
160493
1.0-2.5
160429
160491
1.0-2.5
3.1-3.8
160431
160492
Figure 1
INTRODUCTION
CERTI-CRIMP Hand Crimping Tool 675930-1 is designed to crimp FASTON* .187 Series receptacles onto wire
sizes 0.5-1.5 mm² and 1.0-2.5 mm². Refer to Figure 1.
NOTE
Read these instructions thoroughly before using the hand tool.
NOTE
Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for
reference only and are not drawn to scale.
Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY.
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
are intended for occasional use and low volume applications. A wide selection of powered application
equipment for extended-use, production operations is available.
CERTI-CRIMP* Hand Crimping Tool;
PN 675930-1
Locator
Indenter Jaw
Insulation Adjustment Pin
Ratchet
Back Side of Tool
Link
Anvil Jaw
1.0
–
2.5
Crimping Chamber Markings
0.5
–
1.5