1-528050-1
412-94313 Rev. A
BDA AT-65
– 01/16
Seite/Page/Página 64 / 115
ECOC: EGC0 ; LOC: AI
1
Introduction
1.1
Product Specification
The hydraulic Crimp Machine AT-65 is a hydraulic crimp machine for the TE interchangeable
crimping system and designed as a complete table top unit. With the hydraulic Crimp Machine
AT-65 the most common contacts on the market can be crimped with the TE interchangeable
crimping system.
According to the type of contact an interchangeable suitable crimping tool (consisting of
adapter, die set and safety guard) is installed into the hydraulic Crimp Machine AT-65. By
pressing the foot switch, the crimping cycle of the hydraulic Crimp Machine AT-65 is activated.
In case of blocked jaws caused by operation or handling errors or wrongly placed terminals,
press the release button to open the jaws.
All other applications of the hydraulic Crimp Machine AT-65 are only permitted with a written
permission of the manufacturer. For all unauthorised applications of the hydraulic Crimp
Machine AT-65 the manufacturer cannot be held liable for any resultant damage or injury.
1.2
Conformity
The machine may only be used for the purpose specified in the operating instruction. The
manufacturers and suppliers will not be liable for any damages which may result due to the
machine being used for a purpose other than that for which it was intended.
This is done
entirely at the user’s own risk.
RoHS Information
The hydraulic Crimp Machine AT-65 complies with the EU guideline 2011/65/EU (RoHS2).
EMC
The hydraulic Crimp Machine AT-65 complies with the EU directive 2014/30/EG.
CE
The hydraulic Crimp Machine AT-65 is CE compliant.
The original declaration of conformity was supplied together with the delivery note and
the instruction manual of the machine.
1.3
Dealing with the Operating Instruction
The operating instruction contains all information concerning operating elements, operation,
commissioning and maintenance work as well as technical data.
The operation instruction must be constantly within reach of the hydraulic Crimp Machine AT-
65. Every machine operator must read and understand the operating instruction in order to
have safe and efficient production with this piece of equipment. During the work on or with the
machine the operator has to follow the guidelines of the operating instruction.
The manufacturer and supplier decline to accept any liability for damages that are incurred
due to the fact that the instructions on the machine or in the operation instruction have been
disregarded.
The user is responsible for supplementing the operation instruction with any instructions
resulting from current national regulations for accident prevention and protection of the
environment.
The German original version is legally binding.
This operating instruction has to be guarded for later use.
