5
DSL FILTER INSTALLATION
If you want to have a phone (or other analog
telephony device) and the Actiontec DSL
Gateway connected to the same phone jack,
you will need to use the provided splitter.
1. Connect the splitter to your phone jack.
(figure 9)
2. Connect a DSL filter to one side of
the splitter.
3. Connect your phone (or other analog
telephony device) to the DSL filter.
4. Connect the DSL (gray) cable to the
remaining side of the splitter.
5. Connect the remaining end of the DSL
(gray) cable to the Phone port on the
back of the Actiontec DSL Gateway.
Note: If your DSL light is not solid green
after 5 minutes, the splitter may be
defective. Remove it and verify the
DSL light is solid green.
figure 9
to the
Actiontec DSL
Gateway
