19
CONFIGURING A STATIC IP FOR MAC OS X
1. Select
Apple, then System Preferences
(figure 40), then
Network (figure 41).
2. Select the
TCP/IP tab.
3. Select
Built-in Ethernet from the Show box.
4. Select
Manually from the Configure box.
(figure 42)
5. For
IP address, enter the value labeled E. LAN
IP Address on your Customer Information Sheet.
(If you have more than one value labeled
E. LAN IP Address, you may use any one of
them.) (figure 42)
6. For
Subnet Mask, enter the value labeled
F. LAN Subnet Mask on your Customer
Information Sheet. (figure 42)
7. For
Router, enter the value labeled D. LAN
Gateway Address on your Customer
Information Sheet. (figure 42)
8. For
DNS Servers enter the values labeled
Primary DNS and Secondary DNS on your
Customer Information Sheet (press return
between values to put them on two lines
as shown). (figure 42)
Note: Values entered may differ.
9. Click
Apply Now.
10. Close the Network window.
11. Open your browser (example: Internet Explorer).
Your homepage appears and you should be
able to browse. Proceed to page 21.
figure 42
figure 40
figure 41
configuring a Static IP
Note: Complete the instructions on the
page only if you have purchased a
Static IP package.
