17
configuring a Static IP
Note: Complete the instructions on this page
only if you have purchased a Static IP package.
1. Click
Start, Settings, then Control Panel.
2. Double-click
Network.
3. Select
TCP/IP -> (your network card) to
highlight it then click
Properties.
(figure 36)
4. Select
Specify an IP address.
(figure 37)
5. For
IP Address, enter the value labeled
A. WAN Gateway on your Customer
Information Sheet. (figure 37)
6. For
Subnet Mask, enter the value labeled
F. LAN Subnet Mask on your Customer
Information Sheet. (figure 37)
7. Select the
Gateway tab.
8. For
New gateway, enter the value labeled
D. LAN Gateway on your Customer
Information Sheet then click
Add. The
address you entered will appear in
Installed gateways. (figure 38 next page)
Note: Values entered may differ.
figure 36
figure 37
CONFIGURING A STATIC IP FOR 98, ME, NT & 2000
