configuring a Static IP
Note: Complete the instructions on this page
only if you have purchased a Static IP
package.
1. Select
Start, then Control Panel.
2. Click
Network and Internet Connections.
Note: If you do not see
Network &
Internet Connections, skip to the next
step.
3. Click
Network Connections.
4. Right-click
Local Area Connection.
5. Click
Properties.
6. Select
Internet Protocol (TCP/IP) to
highlight it, then click
Properties.
(figure 33)
7. Click
Use the Following IP Address & Use
the following DNS server addresses.
(figure 34)
8. For
IP address, enter the value labeled
A. WAN Gateway on your Customer
Information Sheet.
(figure 35 next page)
figure 33
15
CONFIGURING A STATIC IP FOR WINDOWS XP
figure 34
