3
Receipt & Inspection
Upon receipt of register shipment, be sure to inspect the packaging and the register assembly for any damage be-
fore signing the receipt of the shipment. Notify the delivery company about possible damage and refuse receipt of
the shipment.
Registers are individually boxed and are protected with static resistant packing material. Each package is identified
with the register assembly part number, description, serial number. Verify the register model is the correct model,
size, and configuration as ordered. Contact your distributor if there is any discrepancy or question.
Register assemblies should be handled with appropriate methods for the size and weight involved. Appropriate
clothing and shoes need to be utilized. Transport the register package to the installation site with appropriate trans-
portation methods, careful not to damage the register.
Be careful of any loose or protruding staples from the packaging, as they can be very sharp and may potentially
cause injury.
If foam has been used to protect register, carefully remove top foam layer before attempting to remove register as-
sembly from box. Foam packaging maybe formed around the register assembly making it difficult to remove. Do
not lift the register assembly by wires or anything other than the metal body of the register. Do not insert objects or
cables into the register unless stated. Removing register assembly from packaging without adhering these warn-
ings may cause serious injury to you and/or the register.
Appropriate precautions should be taken regarding any personal, environmental and material compatibility with the
end use system.
Notice
Total Control Systems (TCS) shall not be liable for technical or editorial errors in this manual or omissions from this manual.
TCS makes no warranties, express or implied, including the implied warranties of merchantability and fitness for a particular
purpose with respect to this manual and, in no event, shall TCS be liable for special or consequential damages including, but
not limited to, loss of production, loss of profits, etc.
The contents of this publication are presented for informational purposes only, and while every effort has been
made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied,
regarding the products or services described herein or their use or applicability. We reserve the right to modify or
improve the designs or specifications of such products at any time.
TCS does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper
selection, use and maintenance of any TCS product remains solely with the purchaser and end-user.
All rights reserved. No part of this work may be reproduced or copied in any form or by any means –
graphic, electronic or mechanical – without first receiving the written permission of Total Control Systems,
Fort Wayne, Indiana USA.
