18
Weights & Measures
Weights & Measures Settings
NOTE: The Calibration bolt must be removed in order to enter calibration mode. To remove the bolt, unscrew
the bolt with a 3mm Hex drive. Place calibration plate and screw in a safe location where it will not be lost. Un-
der the calibration plate you will find a screw. Using the 3mm Hex drive, loosen the calibration screw. You do
not need to remove this screw all the way.
*If you lose the calibration screw, you will not be able to operate the register.*
DO NOT LOSE THE SCREW
BEFORE YOU CALIBRATE THE REGISTER YOU MUST ENTER A PRODUCT
To Calibrate begin in section ADD NEW on Page 20.
PRODUCTS
PRODUCT TEST RUN
This allows you to run the product after you’ve calibrated in order to verify repeatability.
Available Products
Highlight the product you are calibrating and select ENTER.
START automatically begins the product test run until you press STOP to
finish.
RECALIBRATE PRODUCT
Available Products
Highlight the product you want to re-calibrate and select ENTER.
*If you need to modify the settings you originally selected for the calibration of a product select MODIFY PA-
RAMETERS, if the settings were correct and you do not need to change them select BEGIN RECALIBRATION.*
A) Modify Parameters
Product Name
Using the keypad type in the name of the product you are calibrating. If
the product listed is correct select ENTER. To change the product name
press Enter and input name as desired.
Compensation Table
Choose the correct Volume Temperature Compensation Table and press
ENTER. See TABLE 2 for reference.
Comp. Table Param.
Input the correct Compensation Table Parameter and press ENTER. See
TABLE 2 for reference. NOTE: this list references most common products,
not an exhaustive list of every volume correction
Product Name
API Table
Coefficient Value
Range
Mean
Refined Fuels
6B
Specific Gravity
0 — 85
Liquefied Propane Gas (LPG)
24
Specific Gravity
0.500 — 0.550
0.510
Gasoline
54B
Density KG/m3
640 — 780
730
Diesel Oil
54B
Density KG/m3
780 — 1074
840
Fuel Oil
54B
Density KG/m3
830 — 900
840
Kerosene / Jet Fuel
54B
Density KG/m3
780 — 840
800
Stoddard Solvent
54B
Density KG/m3
780 — 800
790
Lubricating Oils
54B
Density KG/m3
850 — 905
880
TABLE 2
