22
Weights & Measures
E) Remove Product
To remove an unwanted product from the TCS 3000, select and press ENTER.
To confirm product removal, press MODE. NOTE: You must first End Shift and
then Deactivate the product under Product Settings.
2) ACCOUNTING
Select Accounting to set the Ticket Number.
SYSTEM METRICS
PRECISION
The unit precision can be displayed as a whole, tenth, hundredth or thousands measurement.
After selection, press ENTER to complete setting.
1
Whole Unit
1.1
Tenth Unit
1.11
Hundredth Unit
1.111
Thousands Unit
SYSTEM TOTALIZERS
This function will allow the System Totalizers to be changed to zero (0). Press ENTER to
proceed with change.
Volume Unit
Once the Totalizer has been changed, the display will prompt you to
change the Unit of Measure for the Totalizer. Highlight the Unit of Measure and press
ENTER.
4) TEMP PROBE
This function is used to change the reference temperature of the meter system RTD
temperature probe. Highlight Offset Calibration and press ENTER.
Highlight Reference Temperature Unit of Measure and press ENTER.
Enter the correct temperature to recalibrate the Reference Temperature and press ENTER.
5) METER INFORMATION
Selecting Meter Information allows you to enter the information off of your meter and
register. This information is required for the Report Menu on page 10, as well as the
Prover Tickets from Meter Calibration.
GAL
USA Gallons
L
Liters
UKG
UK Gallons
daL
Dekaliter
mL
Milliliter
m3
Cubic Meter
bbl
Barrel
F
Fahrenheit
C
Celsius
K
Kelvin
