TCM FD35C9, Workshop Manual

Page: 145 / 291

3-31
Fig. 3.106
Fig. 3.105
Fig. 3.104
⑤
Install the clutch discs (five separator plates (1)
and five friction plates (2)) as follows: Install
one separator plate first and then one friction
plate. Keep installing pairs of plates in that
order, ending with a separator plate.
Friction plates Separator plates
Fwd 5 6
Rev 5 6
2nd 5 6
⑥
Install the end plate (1) and secure with the
snap ring (2).
⑦
Install the thrust washer (1), needle bearing
(2), and gear (3).
Fig. 3.103
Press