1
Instructions to the panel/
planer PH365
IdNr 2014-365-000-1
We hope that you will get a lot of
pleasure and use from your new
woodworking machine. The following
points should be observed to ensure
trouble-free use.
IMPORTANT!
General
Check the machine as soon as it
delivered.
Any damage caused during
transportation
should be reported immediately to the
transport company.
All guards and plates must be
mounted before the machine is used.
LIFTING MACHINE using forklift or
pallet truck
When replacing parts, use only
genuine parts and note that all electric
must be installed by a professional.
Floor space
The machine needs a space on 2
m width
The length depending on how
long working pieces are. Min
length is 5 m.
Anchoring
For maximum safety the machine
anchored to the floor with screws. Dia.
8-10 mm.
Application
The machine can be used to mould
and panel planing wood, particle
board, board, etc..
Difficult materials such as chip board,
teak wood, MDF, etc. requires carbide
steel.
The machine is made for indoor and
temporary outdoor use.
Summary of Contents for PH365
