TCM FD35C9, Workshop Manual

Page: 187 / 291

3-73
Fig. 3.234
Fig. 3.236
Fig. 3.235
⑨
Remove the eight backing plate mounting
bolts (1) and then remove the backing plate (3)
from the drive axle (2).
⑩
Remove the retainer (3) and washer (4)
securing the brake lever (1) to the primary
shoe (2). Remove the brake lever (1).
⑪
Disassemble the wheel cylinder as follows:
● Remove the push rod (1) and dust cover (2)
from each side of the wheel cylinder.
● Press one piston (3) into one end of the
cylinder to remove the piston cup (4) and
piston (5) from the other end of the cylinder.
● Press the piston (3) with the fingers to remove
from the cylinder.