![background image](http://html1.mh-extra.com/html/tc-electronic/g-sharp/g-sharp_user-manual_3896914028.webp)
27
MIDI Bulk Dump
By performing a MIDI bulk dump you are able
to dump all presets to an external MIDI device
such as a sequencer for backup.
• Press and hold the PRESET ON/OFF key
approx. 2.5 sec.
• Use the ARROW UP/DOWN keys to select
Bulk Dump mode.
The display will show:
• Set the receiving device in MIDI bulk receive
mode. A standard MIDI sequencer program
should typically be set to record a MIDI track.
(Please refer to the user manual of the
receiving device).
• Now press LOAD once, and the MIDI Bulk
Dump is performed.
The G-Sharp is always ready to receive
a MIDI bulk dump unless the receive
MIDI channel is set to off “OF”
Reset Procedure
If you would like to do a complete reset of the
G-Sharp and return to factory settings follow
this procedure:
• Power down by disconnecting the power
cord.
• Press and hold TAP while re-connecting
power. The display will show a flashing “R”.
• Press LOAD to reset.
• Power off - power on.
The unit is now reset.
Be aware that all user presets will be
lost when performing a factory reset!
MIDI Continuous Controllers
Via an external MIDI device sending MIDI
Control Changes you are able to control the
parameters listed below.
Parameter
Control Change
number:
In Level
12
Effects Mix
13
Reverb Mix.
14
Digi. In
15
Bypass
81
Effects. Type
50
Effects. Off
82
Timing
16
Tap
80
Feedback
17
Rev. Type
51
Rev. Off
83
PreDelay
18
Decay
19
Color
20
APPENDIX -
MIDI CC & RESET & BULK DUMP