![background image](http://html1.mh-extra.com/html/tc-electronic/g-sharp/g-sharp_user-manual_3896914021.webp)
20
STORE - RECALL & THE G-SHARP DISPLAY
Preset Modes
The G-Sharp holds two significantly different
modes. To toggle between these modes press
the PRESET ON/OFF key.
“Preset On” mode
In this mode it is possible to load any of the
previously stored presets.
The “Preset On” mode is active when the
display shows location numbers from 1 to 99.
If you try to load a preset from a location
where no preset is stored - no action will
take place.
“Preset Off” mode
In Preset Off mode the G-Sharp will process
the signal according to the position of the front
controls. A “what you see is what you hear” -
setting.
Once you have accessed the Preset Off
mode and return to the Preset On mode
the preset number will blink indicating
that you must press LOAD to recall the
settings stored with that particular preset.
Display
Edited knobs LEDs
(relevant only in “Preset On” mode)
These LEDs refer to the 9 front panel controls.
See illustration above. (no LED for the INPUT
knob).
When the LEDs are lit they indicate when the
front controls match the current settings of the
active preset.
When changing the position of a knob the
corresponding LED is off/unlit.
Load/Store Presets
Load User Preset
• Enter “Preset On” mode using the PRESET
ON/OFF key. The G-Sharp is in Preset On
mode when the display shows location-
numbers 1 to 99.
Use the UP/DOWN arrows to select the
desired preset (1-99).
• The digits are now blinking to indicate that
you are previewing the preset and it has not
yet been recalled.
• Press LOAD to recall the preset and the
digits are now steady.
Store User Preset
• Enter “Preset On” mode using the PRESET
ON/OFF key. The G-Sharp is in Preset On
mode when the display shows location-
numbers 1 to 99.
• Use the UP/DOWN arrows to select desired
preset location where you intend to store the
preset (1-99).
• The digits are now blinking to indicate that
you have not yet stored the preset.
• Press and hold the LOAD (
HOLD TO STORE
)
key for approx. 2.5 seconds until the digits turn
steady.
Edited knobs LEDs